Full-Field Deformation Measurements in Liquid-like-Solid Granular Microgel Using Digital Image Correlation

This paper presents the experimental characterization of the in-plane deformation field at any depth within a granular support medium (GSM) called Carbomer 940 using digital image correlation (DIC) and particle image velocimetry (PIV). A method was developed to produce a 2D plane of randomly shaped speckles within the GSM for DIC. Four different needle diameters and four different speeds were used as test specimens representative of those utilized for 3D printing of soft matter in the GSM. The results can be used to determine dimensional tolerances and assessing interactions between multiple injection needles and acceptable spacing. The displacements in the direction of needle motion (u) and transverse (v) were obtained. Subsequently, the magnitudes were determined as a function of distance from the needle path and time history. Results show that near the needle there is a region of yielded/fluidized material and away from the needle path the material acts like a viscoelastic solid. Permanent deformation decreases with increased distance from the path and recovery is enhanced by reversing back through the path.     

Hydrodynamic Regimes of Heat and Mass Transfer Apparatuses with a Moving Packing

Hydrodynamic regimes of heat and mass transfer apparatuses with a moving packing are considered. Relations defining the critical velocity, the loss of momentum in the working area, and the dynamic thickness of the layer of packing elements are obtained which are necessary for engineering calculations.     

Identification of the Characteristics of Viscoelastic Materials during Repeated Compression after Unloading by the Numerical-Graphical Method

The problem of describing the behavior of a highly filled polymeric material under compression, which was preceded by preliminary compression and unloading, is considered. The peculiarity of the compression diagrams obtained in the experiment is the downward convexity of the curves of the stress modulus versus time. To solve this problem, a variant of the non-linear endochronic theory of aging viscoelastic materials with several aging and viscosity functions and a numerical-graphical method for identifying the properties of viscoelasticmaterials proposed by the authors earlier, suggesting comparison of the deformation diagrams of intact samples and those that received preliminary damage, are used.     

Electron Energy-Loss Spectroscopy Study of the Change in the Free-Electron Density in Thin Superconducting NbN Films under Ion-Beam Irradiation

The change in the free-electron density in ultrathin (5 nm) superconducting NbN films in the initial state and after irradiation by O⁺ ions to doses of (0.1–0.9) × 10¹⁷ cm^–2 has been studied by electron energy-loss spectroscopy (EELS). The analysis has been performed on cross section samples prepared by the focused ion beam method, using plasmon oscillations with energies up to 50 eV. The radiation-induced replacement of nitrogen atoms with oxygen atoms in niobium nitride is found to change the electrical properties of the material, which leads to a decrease in the free-electron density with an increase in the irradiation dose.     

Accurate Refinement of the Crystal Structure of Ba<Subscript>3</Subscript>TaGa<Subscript>3</Subscript>Si<Subscript>2</Subscript>O<Subscript>14</Subscript> from Langasite Family and Analysis of Structural Transformations Due to Isomorphous Cation Substitutions

An accurate structure analysis of a Ba₃TaGa₃Si₂O₁₄ single crystal from langasite family was performed using four X-ray diffraction data sets collected on a diffractometer equipped with a CCD area detector (sp. gr. P321, Z = 1, sinθ/λ ≤ 1.35 Å^–1; at 295 K a = 8.516(1) Å, c = 5.1910(6) Å, R/wR = 0.58/0.56%, Δρ_min/Δρ_max =–0.73/0.42 e/ų, 4414 independent reflections; at 106 K a = 8.5109(9) Å, c = 5.1861(9) Å, R/wR = 0.75/0.86%, Δρ_min/Δρ_max =–0.81/1.06 e/ų, 4382 reflections). The distinguishing feature of the Ba₃TaGa₃Si₂O₁₄ structure is a strong disorder of the Ga atom at the 3f site. Structural transformations in the series of Сa₃TaGa₃Si₂O₁₄–Sr₃TaGa₃Si₂O₁₄–Ba₃TaGa₃Si₂O₁₄–Ba₃TaFe₃Si₂O₁₄ crystals were analyzed.     

Study of the Reactivity of Ni Nanotubes in Media with Different рН

Nickel nanotubes have been synthesized by electrochemical deposition, and their reactivity in aggressive media has been investigated. Kinetic curves of the variation in the atomic ratio between Ni and O in the nanotube crystal structure as a function of the medium acidity are built.     

Unfamiliar Aspects of Bäcklund Transformations and an Associated Degasperis–Procesi Equation

We summarize the results of our recent work on Bäcklund transformations (BTs), particularly focusing on the relation between BTs and infinitesimal symmetries. We present a BT for an associated Degasperis–Procesi (aDP) equation and its superposition principle and investigate the solutions generated by applying this BT. Following our general methodology, we use the superposition principle of the BT to generate the infinitesimal symmetries of the aDP equation.     

Atomistic Simulation of Interfaces in Materials of Solid State Ionics

The possibilities of describing correctly interfaces of different types in solids within a computer experiment using molecular statics simulation, molecular dynamics simulation, and quantum chemical calculations are discussed. Heterophase boundaries of various types, including grain boundaries and solid electrolyte?solid electrolyte and ionic conductor?electrode material interfaces, are considered. Specific microstructural features and mechanisms of the ion transport in real heterophase structures (cationic conductor?metal anode and anionic conductor?cathode) existing in solid state ionics devices (such as solid-state batteries and fuel cells) are discussed.